​低电容带屏蔽变频电机电缆

产品简介
低电容变频电缆，双层屏蔽电缆，双层屏蔽变频电机电缆

详细信息
​低电容带屏蔽变频电机电缆2YSLCY-JB/2YSLCYK-JB, 双层屏蔽的设计用于对电磁兼容性能要求高的场合，以连接电动机和变频器，并且可以在干燥或潮湿的环境中承受中等大小的应力，但是不能用于室外。低电容，PE 芯线绝缘，使其在变频器、伺服器和DNC 电动机应用中无干扰。尤其是要求电缆长度更长的地方。为了电磁兼容较化设计，电缆有三根芯线时，应该使用保护接地导线。

application

ANBP8587  double  shielded  are  designed  for  application with   high   EMC   requirements   to   connect   motors   and frequency  converters  and  can  be  used  for  medium  strain application in dry and damp areas. The low capacitance PE core  insulation  allows  a  disturbance  free  application  in frequency   converters,   servo   and   DNCmotors   especially where  longer  cable  lengths  are  needed.  For  optimized EMC-Design,  cables  with  three  core  protective  conductor should be used.

细裸铜丝多股精绞成束，(PE)芯线绝缘,芯线颜色符合DIN VDE 0293 308部分标准，带一根或者三根绿黄保护接地导线。芯线绞合成缆，铝箔包覆，镀锡铜丝屏蔽。PVC 或者无卤外护套，阻 燃 和 自 熄 (符 合 DIN  EN  60332-1-2  VDE  0482  332-1-

2:2005-06 部分标准). 外护套颜色，请参阅下一页的表格。黑色外护套的为耐UV 紫外线。

construction

Fine  strands  of  bare  copper  wires.  PE  (polyethylene)  core insulation,  core  colours  acc.  to  DIN  VDE  0293,  part  308 with  one  (or  three)  greenyellow  protective  conductor(s). Cores  twisted  in  layers,  aluminium  foil,  tinned  copper shield.   PVCbased   or   halogen-free   outer   sheath,   flame retardant  and  self-extinguishing  (acc.  DIN  EN  60332-1-2 VDE  0482  part  332-1-2:2005-06).  For  the  outer  sheath colours  please  refer  to  the  table  on  the  next  page.  The

outer sheath in black is UV-resistant.

额定电压/ rated voltage:

600/1.000 V

测试电压/ test voltage:

4.000 V

导体绞合方式/ conductor stranding:

细铜丝绞合/ fine copper strands, 符合/ acc. to DIN VDE 0295, 5 类标准/ class 5

绝缘阻抗/ insulation resistance:

min. 20 MOhm x

耦合电阻/ coupling resistance:

max. 250 Ohm/km

温度范围/ temperature range:

固定安装/ fixed installation:

-30° C 至/to +80° C

移动应用/   exible application:

-5° C 至/to +70° C

弯曲半径/ bending radius:

移动应用/   exible application:

15 x d 外径-Ø / outer-Ø

符合标准/ approvals:

​低电容带屏蔽变频电机电缆+低电容变频电缆，双层屏蔽电缆，双层屏蔽变频电机电缆